Lexmark J110, Printer manual 4085-001, Service Manual

4085-001

Status Message	Status	Action
Printing Test Page	A representation of	Press Menu> or Menu<
	the operator panel	to access the Busy/
	when Clean	Waiting Menu group. The
	Printheads is selected	printer is online while the
	from the menu. This	Busy/Waiting Menu group
	message appears	is active. The following
	until the Clean	functions may be
	Printheads test page	available using the Busy/
	is formatted and	Waiting Menu group:
	submitted to the print	-Cancel Job
	engine and then Busy
		-Reset Printer
	is shown.
		Note: Menu Lockout
		does not prevent access
		to the Busy/Waiting Menu
		group. If no function in the
		Busy/Waiting group is
		available, the Menus
		Disabled message is
		temporarily shown when
		Menu> or Menu< is
		pressed.
Prog Engine Code	A representation of	No buttons are active
DO NOT POWER OFF	the operator panel	while this message is
Note: This message	whenever new code is	displayed.
	programmed in the
may display after	engine flash. When
replacing the index	the programming is
card and encoder disk	complete, the printer
	returns to the Ready
FRU.
	screen. I

2-22Service Manual