Lexmark J110, Printer manual 4085-001, Service Manual

4085-001

Attendance Message	Description	Action
Change<input source>	A representation of	Sources equipped with
<size>	the operator panel	both size-sensing and
Change<input source>	when the printer is	media-present hardware:
	requesting the	Load the requested size
<type><size>	operator to change
		and/or paper type in the
	the media installed in
		source indicated in the
	one of the input
		message. If media is
	sources. The input
		present in the source and
	source is displayed on
		the sensed size is correct,
	line 1 and could be
		then the printer
	one of the following:
		automatically clears the
	Tray 1, Tray 2, MP	message and continue
		the job.
	Feeder.
		If the source already
	If the requested type	contains the correct size
		and paper type, then
	matches the type that	press Go. This situation
	is installed in the tray	occurs when the user
	and the type is one of	changes the media in the
	the custom types	source, but forgets to
	which has not been	change the paper type
	named, then only the	setting in the menus. Go
	size is displayed. One	is ignored if the sensed
	of the following sizes	size is incorrect or media
	is left-justified on line	is not present in the tray.
	2:	Note: The printer
	Letter, Legal, B2,	assumes the user loaded
		the correct paper type.
	A4, Executive,
		The new paper type,
	Universal, A5,
		paper size, and custom
	7 3/4 Envelope,
		string settings are stored
	9 Envelope,
		in NVRAM.
	10 Envelope,
	DL Envelope, C5
	Envelope,
	B5 Envelope,
	Other Envelope

2-26Service Manual