4085-001
Paper Feed Service Check
Note: Be sure the printer is unplugged from the AC outlet before performing this service check.
If you are experiencing a paper jam:
1.Check the 200 error code paper jams. See “Paper Jams” on page
2.Check the entire paper path for obstructions.
3.Be sure the input tray contains not more than 150 sheets of paper and the manual tray not more than 100.
4.Be sure the correct type of paper is being used.
5.Check for static in the paper.
6.Ensure the correct position of the left paper adjuster guide assembly.
| FRU | Action |
|
|
|
1 | Gears | Check for binds in the gear train and paper feed |
|
| mechanism by rotating the large feed roll by hand. |
|
| Check all gears for correct installation and signs of |
|
| wear or damage. If there is a bind, isolate it by |
|
| removing one of the small idler gears on the inside |
|
| of the left side frame. Replace any worn or binding |
|
| gears or rollers. |
|
|
|
2 | Paper Path | See “Paper Jams” on page |
|
|
|
