Lexmark Printer, J110 manual 4085-001, Performing Self Test

4085-001

Status Message	Status	Action
Performing Self Test	A representation of	No buttons are active
	the operator panel	while this message is
	during Power-On Self	displayed.
	Test (POST). When
	the test is complete,
	the printer enters the
	Ready state.
Powering Down	A representation of	No buttons are active
	the operator panel	while this message is
	during power-down	displayed.
	cycle, after the user
	has turned the
	machine off. In the
	event that no errors
	are found, this is the
	last message shown
	before power is cut off
	to the RIP and engine.
	It is possible that an
	error condition could
	be detected that
	causes the printer to
	go into a different
	state. The error
	conditions that could
	cause this are:
	-Paper Jams
	-Service Messages

Diagnostic Information 2-19