Lexmark Printer, J110 manual PerfectFinish Motor Removal, Index Motor Assembly Removal

4085-001

PerfectFinish Motor Removal

1.Remove the rear cover. Refer to “Rear Cover Removal” on page 4-3.

2.Disconnect the PerfectFinish motor and encoder connector (J5) from the engine board.

3.Remove the two screws {A} from the motor.

4.Remove the motor. Note routing of wiring.

Index Motor Assembly Removal

1.Remove rear cover. Refer to “Rear Cover Removal” on page 4-3.

2.Remove engine board cover. Refer to “Tray 2 Covers Removal” on page 4-49.

3.Disconnect (J16) from the engine board.

4.Remove the encoder disk feed roller assembly. Refer to “Encoder Disk Feed Roller Assembly Removal” on page 4-34.

5.Remove the two screws from the index motor.

6.Remove the motor. Note the routing of the wiring.

Repair Information 4-33