Right Index Frame Pivot Assembly Removal
1.Remove all covers.
2.Remove the carrier and belt. Refer to “Engine Board /Cover Removal” on page
3.Remove the pump housing, maintenance station, tank and the transport carrier motor. Refer to “Pump Housing/Maintenance Station/Ink Waste Tank/Transport Carrier Motor Removal” on page
4.Remove the star wheel shaft. Refer to “Star Wheel Shaft Assembly Removal” on page
5.Remove the paper feed platen. Refer to “Paper Feed Platen Assembly Removal” on page
6.Remove encoder disk feed roller assembly. Refer to “Encoder Disk Feed Roller Assembly Removal” on page
7.Remove the two index frame springs {A}.
8.Remove three screws and washers {B} from the right index frame pivot assembly.
9.Remove the right index frame pivot assembly.
Repair Information
