Lexmark Printer, J110 manual Exit Shaft with Gear Removal, 4085-001

4085-001

Exit Shaft with Gear Removal

1.Remove all covers.

2.Remove carrier and belt. Refer to “Engine Board /Cover Removal” on page 4-14.

3.Remove pump housing, maintenance station, tank, and transport carrier motor. Refer to “Pump Housing/Maintenance Station/Ink Waste Tank/Transport Carrier Motor Removal” on page 4-20.

4.Remove star wheel shaft. Refer to “Star Wheel Shaft Assembly Removal” on page 4-36.

5.Remove paper feed platen. Refer to “Paper Feed Platen Assembly Removal” on page 4-38.

6.Remove the E-clip from the right end of the exit shaft.

7.Move exit shaft to the left, lift and pull to the right to remove the exit shaft gear {A}. Note the orientation of the gear before removal.

8.Remove the exit shaft.

Repair Information 4-39