Lexmark J110, Printer manual Encoder Disk Feed Roller Assembly Removal

4085-001

Encoder Disk Feed Roller Assembly Removal

1.Remove the rear cover. Refer to “Rear Cover Removal” on page 4-3.

2.Remove the operator panel cover. Refer to “Operator Panel Cover/Operator Panel Removal” on page 4-5.

3.Remove the exit tray cover. Refer to “Exit Tray Removal” on page 4-5.

4.Remove the left cover. Refer to “Left Cover Removal” on page 4-7.

5.Remove the thrust bracket CBM {A}.

6.Remove the index board assembly.

7.Remove the five backup roller springs {B}. Note orientation of springs before removing.

8.Remove the encoder disk feed roller assembly through the left side of the printer.

Note: The index card and the encoder disk feed roller must be replaced as a matching set. See “Index Card Assembly Removal” on page 4-22. Also replace the thrust bracket and the cleaning roller.

4-34Service Manual