Lexmark Printer, J110 manual 4085-001

4085-001

Attendance Message	Description	Action
81 Engine Code	A representation of	Press Go to clear the
CRC Failure	the operator panel	message. The microcode
	when microcode to be	data is discarded and
	programmed in the	must be re-transmitted
	engine flash code	from the host computer.
	module has failed a
	CRC check.
Flushing Buffer	A representation of	No buttons are active
	the operator panel	while this message is
	when the printer is	displayed.
	flushing a print job.
	The interpreter is
	flushing the currently
	active job until an End
	Of Job is found or until
	no data has been
	received on the active
	host interface for 5
	seconds.
	This message is
	commonly displayed
	when the Lexgear
	interpreter receives a
	print job with data
	corruption. It can also
	be displayed when a
	print job is sent to the
	printer in PostScript or
	PCL 5 emulations.

Diagnostic Information 2-33