Use the following steps to access the Diagnostics printer settings and operations.
1.Turn off the printer.
2.Press and hold the buttons identified in
3.Turn on the printer. Release the buttons once the Performing Self Test message is displayed.
Clear NVRAM (non-critical sections only)
This operation restores factory default values for most printer settings.
Warning: Extreme caution should be used when using this operation as it cannot be undone. The Customer Support Center should only instruct customers to use this function as a last resort.
Use the following steps to restore the factory default values for all affected settings:
1.Turn off the printer.
2.Press and hold the buttons identified in
3.Turn on the printer. Release the buttons once the Performing Self Test message is displayed.To indicate factory defaults are being restored, the Restoring Factory Defaults message is displayed.
Note: This operation can also be initiated from the Configuration Menu Group by selecting the Factory Defaults = Restore All option. The restoration of the factory default values occurs after the user exits the Configuration Menu Group.
Enter Flash Engine Code Mode
This operation lets you POR the printer into a mode that disables the Engine Code, and lets you program new code in the Engine card. Typically this function is used to reprogram defective Engine code.
Diagnostic Aids
