4085-001
PerfectFinish Sensor Assembly/Rear Paper Path Sensor Removal
1.Remove the rear cover. Refer to “Rear Cover Removal” on page
2.Remove the power supply. Refer to “Power Supply Removal” on page
3.Remove the
4.Disconnect the wire from the PerfectFinish sensor.
5.Remove two screws from the PerfectFinish sensor.
6.Remove the PerfectFinish sensor.
7.Remove the PerfectFinish tank.
8.Remove two screws and remove the PerfectFinish cartridge.
9.Unsnap the rear paper path sensor arm and remove. Note the position of the spring.
10.Lift the left side, unlatch the paper path sensor.
11.Disconnect the wire from paper path sensor.
12.Remove the paper path sensor.
