Lexmark Printer, J110 manual Panel Description Available on Status Message Screen

4085-001

Warning Messages

As shown in each of the Status Screens, only one warning message can be displayed at any one time. Once the current warning condition is cleared, the printer automatically shows the next highest priority warning message. If an event occurs which causes a higher priority warning, the higher priority warning message replaces the lower priority warning message.

Panel	Description	Available on Status
Message		Screen
Supplies	One or more of the printer supply items	• Ready
	has either reached its life warning or is	• Hex Trace Ready
	exhausted and/or one of the paper	• Power Saver
	sources is low, empty, or missing.	• Busy
		• Resolution Reduced
		• Waiting
Parallel	The host interface from which the	• Ready
USB<x>	printer is currently drawing and	• Hex Trace Ready
	processing data.	• Power Saver
	Those messages which are not	• Busy
		• Resolution Reduced
	designated by a <x> imply the active
		• Waiting
	host interface is a standard interface.
	Those messages designated by <x>
	indicate the active interface is
	connected to the printer by PCI
	connector x.
	Those messages designated by
	<x><y> indicate the active interface is
	connected to the printer by a channel y
	on PCI connector x, or if x=0 on the
	standard network interface.
	The copying message is shown when
	the printer is drawing and processing
	data originating from an OptraImage™
	scanner connected to the printer by a
	network adapter.
	Note: There is no Copying host
	interface. The associated network
	interface which exists between the
	printer and network adapter is used for
	data transmission.

Diagnostic Information 2-13