4085-001
Unsolicited Manual Feed
When configured without a MP Feeder, a user may perform an unsolicited manual feed. Prior to sending a job (or before the first page of the job is picked), a user sticks a piece of paper in the manual slot. The engine “grabs” the paper and pulls it into the nip. The engine waits for the RIP to submit the print page. Regardless of which source the RIP requests for that page, it prints on the page that was inserted. Furthermore, the RIP and engine assumes that the media that was inserted is the requested size and type that were selected through the data stream.
Note: Unsolicited manual feed is not available when the MP Feeder is installed. The MP Feeder functions exactly like the Lexmark Optra™ T MP Feeder.
Manual Duplex
Through the driver, this printer supports manual duplex. Select manual duplex from the driver UI and the printer forces all sheets (front and back sides) to be printed from tray 1 (this eases the confusion related to sequencing of sides). After the driver has sent the front sides of the job, a data stream command sent from the driver prompts the user to reinsert the sheets (face up) into tray 1. After pressing Go, the printer continues and prints the back sides from tray 1.
Printing Menu Settings Page
Select Print Menus from the Utilities Menu. The printer automatically exits the control panel menus and prints the menus page. The Printing Menu Settings message appears and the Power indicator blinks while the page formats and prints.
Note: The menus page must be printed on Letter, Legal, or A4 paper. The menus page contains the following information:
•List of all the printer settings in the control panel menus, and their default values.
•List of the installed features such as RAM memory SIMMs, optional input trays, flash, and disk.
•Printer information such as serial number, page count, installed RAM, Engine code level, RIP code level, tray code levels,
