magicolor 330 - Base Engine Service Manual 5-5
Primary Fault Isolation Procedures

5.1 - Light (Undertoned) Prints, continued

Step Actions and Questions Yes No
6FUSER INSPECTION
Inspect the image on the sheet o f paper after it exits the Fuser Rolls.
Is the image light when it exits the Fuser?
Go to step 7
7
1. Replace the Oil Roll Assembly (RRP 9.82).
2. Generate a dozen test print.
3. Inspect the image on the last sheet out.
Is the image density now normal as it exits the Fuser?
Problem
Solved Replace the
Pressure Roll
(RRP 9.83) and
the Heat Roll
(RRP 9.84)