13-2magicolor 330 - Base Engine Service Manual
Printer Specifications
General Specifications
Category Specification
Standard configuration Print Engine with Upper Tray (250 sheet), MSI (150 sheet),
and Face Up Tray
Printing method Xerography with two transfer processes
Exposure method Data modulated (off/on) laser beam scanning
Laser specifications Class 3B, 5milliwatt semiconductor laser diode
Resolution of printed image 600 dpi (dots per inch)
Development method Dry toner and carrier mixture
Fusing method Heat and pressure, with silicone oil lubricant
Black and White Printing Mode 16ppm. Monochrome using a single image that is made up of black
toner
Four Color Mode 4ppm. Four color process using separate yellow, magenta, cyan, and
black toner images
Warm-up time From either a cold start or from deep sleep mode (with an ambient
temperature of 22°C and relative humidity of 55%) to Ready to Print
within five minutes
Power supply requirements 110V pr inte r
100 VAC (±10%) @ 50/60 Hz (±3 Hz)
120V printer
120 VAC (±10%) @ 50/60 Hz (±3 Hz)
240V printer
220/240 VAC (±10%) @ 50/60 Hz (±3 Hz)
Power supplied to the Controller PWB 5VDC @ 6.0A
Power consumption and input current of
the IOT during a print cycle. These fig-
ures do not take into account the power
consumption of the Controller PWB.
During Print Cycle:
100VAC: 1100 watts or less
120VAC: 1100 watts or less
240VAC: 1100 watts or less
At Ready:
100VAC: 1000 watts or less with Fuser on.
100 watts or less with Fuser off.
120VAC: 1000 watts or less with Fuser on.
100 watts or less with Fuser off.
240VAC: 1000 watts or less with Fuser on.
100 watts or less with Fuser off.
During Light Sleep:
100VAC: 1000 watts or less with Fuser on.
100 watts or less with Fuser off.
120VAC: 1000 watts or less with Fuser on.
100 watts or less with Fuser off.
240VAC: 1000 watts or less with Fuser on.
100 watts or less with Fuser off.
During Deep Sleep:
100VAC: 20 watts or less
120VAC: 20 watts or less
240VAC: 20 watts or less