magicolor 330 - Base Engine Service Manual 9-57
Removal and Replacement Procedures
RRP 9.26 MSI Top Cover Assembly (PL4.2.4)
Removal
1. Remove the MSI Front Cover (RRP 9.23).
2. Remove the MSI Rear Cover (RRP 9.24).
3. Remove the two screws securing t he MSI Top Cover Assembly to the MSI Frame and remove the Top
Cover (Figure 1).
4. Release the two latches securing the MSI Ha rness Plate to the MSI Top Cover and remove the Plate
(Figure 2).
5. Disconnect the P/Js that are attached to the two Sensors on the Top Cover.
Replacement
1. Reconnect the P/Js to the two Sen sors that are attached to the MSI Top Cover Assembly.
2. Route the wire harnesses a long the channels molded into the underside of the Cover.
3. Reinstall the MSI Harness Plate to the MSI Top Cover making sure the two latches secure the Plate to
the Cover.
4. Reinstall the MSI Top Cover Assembly to the MSI Frame and use two screws to secur e the Cover to
the Frame.
5. Reinstall the MSI Rear Cove r (RRP 9.24).
6. Reinstall the MSI Front Cover (RRP 9.23).