5-36 magicolor 330 - Base Engine Service Manual
Primary Fault Isolation Procedures
5.18 - Image Not Registered Correctly on the Page
PROBLEM
The image area is not centered on the page or th e imag e is blee ding off of the page. THE
PRINTER DISPLAYS NO ERROR MESSAGE.
• Registration Sensor (RRP 9.45)
• TR0 Sensor (RRP 9.79)
• Main Paper Handling Assembly (RR P 9.36)
• Controller PWB (RRP 9.129)
• Print Driver Software
Step Actions and Questions Yes No
1PAPER INS PEC TIO N
Inspect the paper that is loaded in the Paper Trays or MSI.
Is the paper loaded corr ectly and are the pape r guides in place?
Go to step 2 Reload paper
correctly and
position the
paper guides
2Replace the Metal Registration Roll (RRP 9.43) and t he Ru bber Reg-
istration Roll (RRP 9.44)
Is the image registered correctly on the page?
Problem solved Go to step 3
3Replace the Registration Clutch (RRP 9.42)
Is the image registered correctly on the page?
Problem solved Go to step 4
4Replace the MCU PWB (RRP 9.123)
Is the image registered correctly on the page?
Problem solved Replace the
ROS Assem-
bly (RRP 9.47)
RS515X