Minolta 330 5.13 - Skewed Image, continued

magicolor 330 - Base Engine Service Manual 5-29

Primary Fault Isolation Procedures

5.13 - Skewed Image, continued

Step Actions and Questions Yes No

REGISTRATION ROLL INSPECTION

1. Generate a test print and slide the Fuser Assembly out of the

printer just as the sheet of paper is moving through the Registra-

tion Rolls.

2. Carefully slide the Main Paper Handling Assembly out of the

printer and inspect the posit ion of the sheet of paper.

Is the sheet of paper parallel to the edges of the Paper Handling

Assembly as it lea v es the Registration Rolls?

Go to step 6 Replace the

Metal Registra-

tion Roll (RRP

9.43) and the

Rubber Regis-

tration Roll

(RRP 9.44)

2ND BTR INSPECTION

1. Remove 2nd BTR Assembly (RRP 9.75)

2. Manually raise and lower the cam levers at the ends of the 2nd

BTR Assembly.

Are the cam levers undamaged?

When you raise the levers does the 2nd BTR lower and when you

release the levers does the 2n d BTR raise?

Do the cam levers have a strong spring action?

Go to step 7 Replace the

2ND BTR

Assembly

(RRP 9.75)

2ND BTR CAM ASSEMBLY INSPECTION

With the 2nd BTR Assembly still removed, inspect the 2nd BTR

Cam Assembly.

Are the cams undamaged?

Go to Suspect

Components Replace the

2ND BTR Ca

Assembly

(RRP 9.73)