5-32 magicolor 330 - Base Engine Service Manual
Primary Fault Isolation Procedures

5.14 - Damaged Prints, continued

Step Actions and Questions Yes No
13
UPPER EXIT INSPECTION
1. Generate a test print and open the Upper Exit Cover just as the
sheet of paper reaches Exit Roll 3.
2. Inspect the sheet of paper.
Is the sheet of paper und amaged as it nears Exit Roll 3?
Go to step 14 Clean or
replace the
Lower Exit
Assembly
(RRP 9.101)
and the Upper
Exit Assembly
(RRP 9.102)
14 EXIT ROLL 3 INSPECTION
Is the sheet of paper undamaged until it reaches Exit Roll 3?
Go to Suspect
Components Replace Exit 3
Roll Assembly
(RRP 9.105)