magicolor 330 - Base Engine Service Manual 9-17
Removal and Replacement Procedures
RRP 9.6 Filter Assembly (PL1.1.32)
Removal
1. Press the Filter release ta b as you pull up on the Filter.
2. Slide the Filter out of the slot in the Rear Cover.
Replacement
1. Position the Filter at the opening of the slot in the Rear Cover, making sure the release ta b at the top of
the Filter faces the latch on the Rear Cover.
2. Press the Filter release ta b as you slide the Filter into the slot.
3. When the Filter bottoms out, release the tab making sure the tab hooks into the l atch on the Rear
Cover.