magicolor 330 - Base Engine Service Manual 5-33
Primary Fault Isolation Procedures

5.15 - Unfused Image or Image Easily Rubs Off of Page

PROBLEM
The toner image is not completely fused t o the paper. The image easily rubs off. THE
PRINTER DISPLAYS NO ERROR MESSAGE.

         
 
    
 
• Main Fuser Assembly (RRP 9.81)
Step Actions and Questions Yes No
1IMAGE INSPECTION
Is the image density very light?
Go to FIP 5.1
Light (Under-
toned) Prints
Go to step 2
2Replace the Temperature Sensor Assembly (RRP 9.88)
Is the image correctly fused?
Problem solved Go to step 3
3Replace the LVPS (RRP 9.119)
Is the image correctly fused?
Problem solved Go to step 4
4
Replace the MCU PWB (RRP 9.123)
Is the image correctly fused?
Problem solved Replace the
Pressure Roll
Heat Rod (RRP
9.85) and the
Heat Roll Heat
Rod (RRP
9.86)
RS514X