magicolor 330 - Base Engine Service Manual 9-95
Removal and Replacement Procedures
RRP 9.45 Registration Sensor (PL5.2.28)
Removal
1. Remove the Main Paper Handling Assembly (RRP 9.36).
2. Turn the Main Paper Handling Ass embly over and disconnect P/J 93 from the Registration Sensor.
3. Carefully spread the Sensor latch arms as you lift the Sensor away from the latch and off of the Main
Paper Handling Assembly.
Replacement
1. Align the Registration Sensor so the LEDs are against the M ain Paper Handling Assembly and the
positioning hole at the end of the Sensor is over the positioning tab on the A ssembly.
2. Carefully press the Re gistration Sensor into position on the Main Paper Handling Assembly.
The latch arms lock the Sensor into place.
3. Reconnect P/J 93 to the Reg istration Sensor.
4. Reinstall the Main Paper Handling Assembly (RRP 9.36).