magicolor 330 - Base Engine Service Manual 9-153
Removal and Replacement Procedures
RRP 9.74 BTR Cam Solenoid (PL8.1.15)
Removal
1. Remove the High Voltage Power Supply (RRP 9.120).
2. Remove the screw securing the BTR Cam Solenoid to the BTR Side Bracket and remove the Sole-
noid.
3. Disconnect P/J 63 from the BTR Cam Solenoid.
Replacement
1. Reinstall the BTR Cam Sole noid onto the BTR Side Bracket.
2. Line up with positioning hole and screw hol e on the Solenoid with the positioning tab and screw hole
on the Side Bracket.
Make sure the top edge of the BTR Cam Solenoid Bracket is mounted parallel with the to p
edge of the BTR Side Bracket. Image quality problems may result if the Soleno id Bracket
is not parallel.
3. Use one screw to secure the B TR Cam Solenoid to the BTR Side Bracket.
4. Reconnect P/J 63 to the BT R Cam Solenoid.
5. Reinstall the High Voltage Power Suppl y (RRP 9.120).
BTR Side Bracket
BTR Cam Solenoid Bracket
BTR Cam
Solenoid
Parallel
RS2027X