magicolor 330 - Base Engine Service Manual 9-217
Removal and Replacement Procedures
RRP 9.106 Top Exit Sensor (PL10.2.12)
Removal
1. Remove the Lower Exit Assembly (RRP 9.1 01).
2. Squeeze the four latches securing the Top Exit Sensor to the Lower Exi t Assembly and remove the
Sensor.
Replacement
1. Slide the Top Exit Sensor Actuator through the slot in the Assembly.
2. Press the Sensor again st the Lower Exit Assembly until the latches snap into place.
3. Make sure the Actuator moves freely.
4. Reinstall the Lower Exit Assem bly (RRP 9.101).