magicolor 330 - Base Engine Service Manual 7-3
Getting Connected to Engine Diagnostics
Once the new connection setup procedure is completed, HyperTerminal will automatically connect to the
serial cable through the Com port you selected. You are now ready to run the Engine Diagnostics (refer to
section 9).
VTERM (DOS O/S)
1. Bootup Portable Computer to DOS
2. At the C:\ prompt, type "VTE RM"
3. Once VTERM has started, enter the s etup menu, select "F5"
4. Make the following the se lections in the setup menus:
Terminal type; select "VT100 (ANSI)
New line; select "OFF"
Wrap around; select "ON"
Scroll; select "NORMAL"
Screen; select "NORMAL VIDEO"
Cursor type; select "UNDERLINE"
Margin bell; select "OFF"
DA response; select "NO OPTIONS"
Status line; select "ON"
Backspace sends; select "DELETE"
Shift - 3 displays; select "#"
Screen format; select "80 x 24"
1 3 2 column method; select "SCROLLING"
Window movement; select "DELAYED FOLLOW"
Scrollback buffer; select "ALLOW OVERFLOW
Communications rate; select "9600"
Data bits/parity; select "8 NONE"
Receive parity; select "IGNORE"
Stop bits; select "ONE"
Auto Xon/Xoff; select "ON"
Local echo; select "OFF"
On line/local; select "ON LINE"
Printer output to; User select
After PrtSc; User select