magicolor 330 - Base Engine Service Manual 9-211
Removal and Replacement Procedures
RRP 9.103 Full Stack Sensor (PL10.2.21)
Removal
1. Remove the Lower Exit Assembly (RRP 9.1 01).
2. Remove the screw secu ring the Full Stack Sensor to the Lower Exit Assembly.
3. Release the Full Stack Sens or wire harness from the wire clamp.
4. Disconnect P/J167 fro m the Sensor and remove the Sensor.
Replacement
1. Reconnect P/J167 to the Ful l Stack Sensor.
2. Route the Full Stack Sens or wire harness through the wire clamp.
3. Reinstall the Ful l Stack Sensor onto the Lower Exit Assembly and use one screw to secure the S ensor.
4. Reinstall the Lower Exit Assem bly (RRP 9.101).