magicolor 330 - Base Engine Service Manual 9-15
Removal and Replacement Procedures
RRP 9.5 Front Lower Cover (PL1.1.5)
Removal
1. Remove Tray 1 from the printer.
2. Remove the two screws securing the Front Low er Cover to the printer frame and slide the Cover away
from the frame. (Figure 1)
Replacement
1. Slide the Front Lower Cover onto the printer frame, making sure the outside lip of the Cover is on top
of the lip of the frame as shown in Figure 2.
2. Use two screws to secure the Front Lower Cover to th e printer frame.
3. Reinstall Tray 1.