magicolor 330 - Base Engine Service Manual 9-39
Removal and Replacement Procedures
RRP 9.17 Size Switch Assembly (PL3.1.23)
Removal
1. Remove the LVPS (RRP 9.119).
2. Remove the screw secu ring the Size Bracket to the printer frame and remove the Bracket.
3. Disconnect P/J 102 f rom the Size Switch PWB.
4. Remove the screw securi ng the Size Switch PWB to the Size Bracket and remove the PWB.
Replacement
1. Reinstall the Size Switch PWB onto the Size Bracket, maki ng sure you line up the two plastic tabs at
the back of the PWB with the two holes in the Bracket.
2. Use one screw to secure the PWB to the Size Bracket.
3. Reconnect P/J 102 to the S ize Switch PWB.
4. Reinstall the Size Bracke t onto the printer frame and use one screw to secure the Bracket.
5. Reinstall the LVPS (RRP 9.119).