magicolor 330 - Base Engine Service Manual 3-3
Primary FIPS: Error Messages
3 - Primary FIPs: Error Messages
Before entering the Error Messages FIPs:
1. Is the printer plugged into a recommended AC wall outlet?
2. Is the AC power provided at the wall outlet within recommended specifications?
3. Is the AC power cord connected to the printer.
4. Is the AC power cord in good condition; not frayed or broken?
5. Is the printer properly grounded through the AC wall outlet?
6. Is the printer located in an area where the temperature and humidity are moderate and stable?
7. Is the printer located in an area that is free of dust?
8. Is the printer located in an area away from water outlets, steamers, electric heaters, volatile gases, or open
flames?
9. Is the printer shielded from the direct rays of the sun?
10. Does the printer have recommended space around all sides for proper ventilation?
11. Is the printer sitting on a level and stable surface?
12. Is recommended paper stock being used in the printer?
13. Does the customer use the printer as instructed in the QMS User Manual?
14. Are consumables replaced at the recommended intervals?
15. Do you have access to QMS Engine Diagnostic menus and do you know how to use them?
16. Are all of the printer assemblies in place and are all of printer covers and doors firmly closed?