Minolta 330 1

3-4 magicolor 330 - Base Engine Service Manual

Primary FIPS: Error Messages

The Fuser Oil Roll CRU has reached end of life.

Logic Control on the MCU PWB detected that the Fuser Oil Roll CRU has processed the equivalent of 20,000 sheets

of paper since it was installed.

Step Actions and Questions Yes No

SUSPECT COMPONENTS

The following components are associated with this specific prob-

lem. One or more of these components may have failed partially

or completely. If you cannot isolate the problem using this FIP,

replace each component listed below, one at a time, until the prob-

lem disappears.

• Wiring and connectors linking the components

1Replace the Oil Roll Assembly with a new one (RRP 9.82)

Does the error message still appear?

Go to step 2 Problem

Solved

2Replace the MCU PWB (RRP 9.123)

Does the error message still appear?

Go to suspect

components

Problem

Solved