Minolta 330 5.12 - Toner on Back of Print, continued

magicolor 330 - Base Engine Service Manual 5-27

Primary Fault Isolation Procedures

5.12 - Toner on Back of Print, continued

Step Actions and Questions Yes No

FUSER INSPECTION

1. Generate a test print and slide the Fuser Assembly out of the

printer just as the sheet of paper exits the Fuser.

2. Slide the Fuser Assembly out of the printer and inspect the back

of the sheet of paper.

Is the back of the sheet of paper clean and free of tone r whe n it

exits the Fuser?

Go to step 5 Clean the Fuser

Assembly and/

or replace the

Pressure Roll

(RRP 9.83) and

the Heat Roll

(RRP 9.84)

UPPER EXIT INSPECTION

1. Generate a test print and open the Upper Exit Cover just as the

sheet of paper reaches Exit Roll 3.

2. Inspect the back of the sheet of paper.

Is the back of the sheet of paper clean and free of toner as it

nears Exit Roll 3?

Clean the

printer interior Clean or

replace the

Upper Exit

Assembly

(RRP 9.102)