5-30 magicolor 330 - Base Engine Service Manual
Primary Fault Isolation Procedures
5.14 - Damaged Prints
PROBLEM
The printed page exits the printer either wrinkled, cr eased, or torn. THE PRINTER NEI-
THER JAMS NOR DISPLAYS AN ERROR MESSAGE.
• Main Paper Handling Assembly (RRP 9.36)
• Transfer Assembly (RRP 9.71)
• Fuser Assembly (RRP 9.80)
Step Actions and Questions Yes No
1
FEEDER ISOLATION
Feed paper out of each of the avail abl e pa per feeders
Is the paper damaged when fed out of one tray but not when fed
out of the others?
Go to step 2 Go to step 9
2Is the paper damaged when fed out of MSI? Go to step 5 Go to step 3
3Is the paper damaged when fed out of Tray 1? Go to step 7 Go to step 4
4Is the paper damaged when fed out of any tray in the HCF? Go to FIP 4.2
of the HCF
Technical Man-
ual
5MSI PAPER INSPECTION
Inspect the paper that is loaded in the MSI.
Is the paper in good condition and undamaged?
Go to step 6 Replace the
paper with new,
undamaged
paper
6
MSI INSPECTION
1. Remove the MSI Assembly (RRP 9.22).
2. Inspe ct the MSI Assem bly for debris or obviously broken com-
ponents that could be damaging the paper as it feeds out of the
Assembly and into th e printer.
Is the MSI free of debris or broken components?
Go to step 9 Clean the M S I,
or replace the
broken compo-
nents or replace
the MSI
Assembly
(RRP 9.22)
7TRAY 1 PAPER INSPECTION
Inspect the paper that is loaded in Tray 1.
Is the paper in good condition and undamaged?
Go to step 8 Replace the
paper with new,
undamaged
paper
RS513X