magicolor 330 - Base Engine Service Manual 9-89
Removal and Replacement Procedures
RRP 9.42 Registration Clutch (PL5.2.15)
Removal
1. Remove the Main Paper Handling Assembly (RRP 9.36).
2. Turn the Main Paper Handling Asse mbly over and disconnect P/J 94 from the Registration Clutch.
3. Open the Registration Ch ute Assembly.
4. Remove the E ring securing the Registration Clutch to the rear of the Metal Registration Roll and
remove the Registration Clutch from the Roll.
Replacement
1. Slide the Registration Clutch onto the end of the Metal Registration Roll making sure you slide the key
of the Clutch into the tab on the Main Paper Handling Assembly.
2. Use an E ring to secure the Re gistration Clutch to the Metal Registration Roll.
3. Route the Registration Clutch wire to the u nderside of the Main Paper Handling Assembly and recon-
nect P/J 94.
4. Reinstall the Main Paper Handling Assembly (RRP 9.36).