magicolor 330 - Base Engine Service Manual 9-163
Removal and Replacement Procedures
RRP 9.79 TR0 Sensor (PL8.2.12)
Removal
1. Remove the Transfer Assembly (RRP 9.71).
2. Disconnect the P/J from the TR0 Sensor.
3. Remove the screw securing the TR0 Sensor to the IBT frame and remove the Sensor.
Replacement
1. Insert the LEDs of the TR0 S ensor through the slot in the IBT frame.
2. Use one screw to secure the TR 0 Sensor to the IBT frame.
3. Reconnect the P/J to the TR 0 Sensor.
4. Reinstall the Transfer Assembly (RR P 9.71).