magicolor 330 - Base Engine Service Manual 9-191
Removal and Replacement Procedures
RRP 9.93 Oil Cam Solenoid (PL9.3.21)
Removal
1. Remove the Main Fuser Assembly (RRP 9.81).
2. Place the Fuser Tray on a flat and sta ble work surface.
3. Remove the two screws securing the Fuser Rear Rail to the Fuse r Tray and pull the Rail away from
Tray (Figure 1).
4. Disconnect P/J 73 from the O il Cam Solenoid.
5. Remove the two screws securing the Oil Cam Solenoid to the Fuser Tray and remove the Solenoid.
Replacement
1. Line up the screw holes in the Oil Cam Solenoid with the screw holes in the Fuser Tray.
2. Reinstall the Oil Cam Solenoid o nto the Fuser Tray and use two screws to secure the Solenoid to the
Tray.
Make sure the Solenoid arms rest on the Cam as shown in Figure 2.
3. Reconnect P/J 73 to the O il Cam Solenoid.
4. Line up the positioning hole and screw holes in the Fuser Rear Rail with the positioning tab and screw
holes in the Fuser Tray.
5. Reinstall the Fuser Rear Rail onto the Fuse r Tray and use two screws to secure the Rail to the Tray.
6. Reinstall the Main Fuser Assembly (RRP 9.81).