Minolta 330 2

3-72 magicolor 330 - Base Engine Service Manual

Primary FIPS: Error Messages

The Waste Toner Box is almost full.

Logic control on the MCU PWB detected that the Waste Toner Box is almost full and will soon need to be replaced.

Step Actions and Questions Yes No

SUSPECT COMPONENTS

The following components are associated with this specific prob-

lem. One or more of these components may have failed partially

or completely. If you cannot isolate the problem using this FIP,

replace each component listed below, one at a time, until the prob-

lem disappears.

• Wiring and connectors linking the components

1Replace the Waste Toner Box (RRP 9.49).

Does the error message still appear?

Go to step 2 Problem

solved

2Replace the Waste Toner Sensor (RRP 9.53).

Does the error message still appear?

Replace the

MCU PWB

(RRP 9.123)

Problem

solved