magicolor 330 - Base Engine Service Manual 9-19
Removal and Replacement Procedures
RRP 9.7 Left Lower Cover (PL1.1.40)
Removal
1. Remove the two screws securing the Left Lo wer Cover to the printer frame.
2. Lift the Cover and pull the front of the Cover away from the front of the printer frame and remove the
Cover.
Replacement
1. Position the Left Lower Co ver against the printer frame.
2. Reposition the Cover so the two screw holes in the Cover line up with the two screw holes in the printer
frame.
3. Use two screws to secure the Left Lower Cover to the printer frame.
4. Slide the Fuser Assem bly into the printer.
SER309XB