magicolor 330 - Base Engine Service Manual 9-229
Removal and Replacement Procedures
RRP 9.112 Process Motor Assembly (PL11.1.12)
Removal
1. Remove the Rear Cover (RRP 9.4).
2. Disconnect P/J 51 and P /J 52 leading to the Process Motor PWB.
3. Remove the four screws securing the Process Mot or Assembly to the Process Drive Assembly and
remove the Motor Assembly.
Replacement
1. Reinstall the Process M otor Assembly onto the Process Drive Assembly.
2. Line up the four screw holes in the Motor Assembly with the four screw holes in the Pro cess Drive
Assembly.
3. Use four screws to secure the Moto r Assembly to the Drive Assembly.
4. Reconnect P/J 51 and P/J 52 to the Process Motor PWB.
5. Reinstall the Rear Cover (RRP 9.4).