magicolor 330 - Base Engine Service Manual 9-13
Removal and Replacement Procedures
RRP 9.4 Rear Cover (PL1.1.31)
Removal
1. Open the Upper Exit Cover.
2. Remove the Harness Cover.
3. Slide the Main Paper Han dling Assembly a few inches out of the printer.
4. Remove the six screws securing the Rear Cov er to the printer frame and remove the Cover.
Replacement
1. Open the Upper Exit Cover.
2. Slide the Main Paper Han dling Assembly a few inches out of the printer.
3. Reinstall the Rear Cover onto t he printer frame.
4. Reposition the Cover so the six screw holes in the Cover line up with the five screw holes in the printer
frame.
5. Use five screws to secure the Rear Cover to th e printer frame.
6. Slide the Main Paper Han dling Assembly into the printer.
7. Reinstall the Harness C over.
8. Close the Upper Exit Cover.
SER459F