Minolta 330 1, 2

magicolor 330 - Base Engine Service Manual 3-33

Primary FIPS: Error Messages

The Yellow Toner Cartridge is either not installed or not installed correctly.

Logic control on the MCU PWB did not receive a signal from the Cartridge Sensor when the Rotary Frame moved

the Yellow Developer Housing into position.

Step Actions and Questions Yes No

SUSPECT COMPONENTS

The following components are associated with this specific prob-

lem. One or more of these components may have failed partially

or completely. If you cannot isolate the problem using this FIP,

replace each component listed below, one at a time, until the prob-

lem disappears.

• Wiring and connectors linking the components

• Rotary Frame Assembly (RRP 9.67)

1YELLOW TONER CARTRIDGE RESEAT

1. Remove the Yellow Toner Cartridge.

2. Reinstall the Yellow Toner Cartridge.

Does the error message still appear?

Go to step 2 Treat as an

intermittent

problem.

2Replace the Yellow Toner Cartridge (RRP 9.55)

Does the error message still appear?

Go to step 3 Problem

solved

3Replace the Toner Cartridge Sensor (RRP 9.69)

Does the error message still appear?

Go to step 4 Problem

solved

4Replace the MCU PWB (RRP 9.123)

Does the error message still appear?

Go to suspect

components

Problem

solved