magicolor 330 - Base Engine Service Manual 9-77
Removal and Replacement Procedures
RRP 9.36 Main Paper Handling Assembly (PL5.1.1)
Removal
1. Remove the MSI Assembly (RRP 9.22).
2. Slide the Main P aper Handling Assembly far enough out of the printer so you can reach the Assembly
Rails.
3. Push in on the Front Rail latch as you slide the fr ont of the Assembly out far enough to disengage the
latch.
4. Push in on the Rear Rail latch as you slide the rear of the Assembly out far enough to disengage the
latch.
5. Slide the Main Paper Han dling Assembly out of the printer.
Replacement
1. Position the Main Paper Hand ling Assembly so the Front and Rear Rails on the Assembly line up with
the Front and Rear Rails of the printer frame.
2. Push in on the Rear Rail latch as you slide the rear of the Assembly into the printer far enough so the
latch engages.
3. Push in on the Front Rail la tch as you slide the rear of the Assembly into the printer far enough so the
latch engages.
4. Slide the Main Paper Handling Assem bly all the way into the printer and then out again to make sure
the Assembly slides smoothly.
5. Reinstall the MSI Asse mbly (RRP 9.22).