magicolor 330 - Base Engine Service Manual 9-247
Removal and Replacement Procedures
RRP 9.121 Top Cover Switch (PL13.1.3)
Removal
1. Remove the Top Cover Assembly (RRP 9.3).
2. Disconnect P/J 195 fro m the Top Cover Switch.
3. Remove the screw securi ng the Top Cover Switch to the printer frame and remove the Switch.
Replacement
1. Line up the two positioning holes and the screw hole in the Top Cover Switch with the two positioning
tabs and the screw hole in the printer frame.
2. Use one screw to secure the Top Cover Switch to the printer frame.
3. Reconnect P/J 195 to the Top Cover Switch.
4. Reinstall the Top Cover Assembly (RRP 9.3).