Minolta 330 5.9 - Spots, continued

magicolor 330 - Base Engine Service Manual 5-21

Primary Fault Isolation Procedures

5.9 - Spots, continued

Step Actions and Questions Yes No

AUGER ASSEMBLY INSPECTION

With the Belt Cleaner Assembly rem oved, inspect the Belt C leaner

end of the Auger.

Is the Auger clogged?

Go to step 7 Clean the

printer interior

AUGER DRIVE TEST

1. Remove the Rear Cover (RRP 9.4).

2. With the Belt Clea ner Assembly removed watch the Auger

Drive Gear as you hand rotate the Paper Handling Motor.

Does the Fuser Drive Asse mbly rotate the Au ger Drive Gear?

Go to step 8 Replace the

Fuser Drive

Assembly

(RRP 9.110)

AUGER SPRING TEST

As you hand rotate the Paper Handling Motor place your finger

inside the Auger opening and feel the movement of the Auger

Spring.

Does the Auger Spring rotate whe n you hand rotate th e Paper

Handling Motor?

Go to step 9 Replace the

Auger Assem-

bly (RRP 9.77)

WASTE TONER BOX GEAR INSPECTION

Remove the Waste Toner Box (RRP 9.49) and inspect Box.

Is the Waste Toner Box clean, not leaking toner, and not obvi-

ously damaged?

Replace the

Xerographic

Cartridge (RRP

9.48)

Replace the

Waste Toner

Box (RRP

9.49)