magicolor 330 - Base Engine Service Manual 9-49
Removal and Replacement Procedures
RRP 9.22 MSI Assembly (PL4.1.1)
Removal
1. Remove the two screws securing the MSI Assembly to the Main Paper Handling Assembly.
2. Open the Main Paper Handling Assembly far enough for you to access the two P/Js that are located a t
the at the front of Assembly.
3. Disconnect P/Js 91 and 92.
4. If installed, remove the screw securing the ground wire to the Main Paper Handling Assembly.
5. Hold the bottom of the M SI Assembly and rotate it up and away from the Main Paper Handling Assem-
bly.
Replacement
1. Open the Main Paper Hand ling Assembly a few inches.
2. Reinstall the MSI Assembly onto the Main Paper Handling Assembly.
If installed correctly, the weight of the MSI Assembly should hold it in place on the Main Paper Han-
dling Assembly.
3. If installed, reinstall the ground wire to the Main Paper Ha ndling Assembly and use one screw to
secure the wire to the Assembly.
4. Reconnect P/Js 91 and 92 .
5. Use two screws to secure the MSI A ssembly to the Main Paper Handling Assembly.