magicolor 330 - Base Engine Service Manual 9-111
Removal and Replacement Procedures
RRP 9.53 Waste Toner Sensor (PL6.1.42)
Removal
1. Remove the XL Rail Assembly (RRP 9.52).
2. Squeeze in bo th Sensor latch arms as you push down to free the Waste Toner Sensor from the XL Rail
Assembly.
Replacement
1. Position the Waste Toner Sensor on the XL Rail Assembly so the P /J faces the Erase Lamp Assembly.
2. Press the two Sensor latch arms into the cutouts in the XL Rail Assembly.
The Sensor snaps into place.
3. Reinstall the XL Rail Ass embly (RRP 9.52).