magicolor 330 - Base Engine Service Manual 3-59
Primary FIPS: Error Messages

3.55 - Error Message: Replace OPC Drum

The OPC Drum has reached end of life.
Logic control on the MCU PWB detected that the OPC Drum has printed 110,000 images.
Step Actions and Questions Yes No
SUSPECT COMPONENTS
The following components are associated with this specific prob-
lem. One or more of these components may have failed partially or
completely. If you cannot isolate the problem using this FIP,
replace each component listed below, one at a time, until the prob-
lem disappears.
• Wiring and connectors linking the components
1Replace the OPC Drum (RRP 9.48)
Does the error message still appear?
Go to step 2 Problem
solved
2Replace the MCU PWB (RRP 9.123)
Does the error message still appear?
Go to suspect
components
Problem
solved