magicolor 330 - Base Engine Service Manual 12-7
Wiring Diagrams and Signal Information
BD2 MCU PWB↔ADC Sensor↔Erase Lamp↔Waste Toner Sensor↔CRUM
The following table shows the signal names for this BD:
Signal Name Description
LED ON (L) 5VDC Switches the ADC LED. Low=On. High=Off
ADC SIG Analog signal from the ADC Sensor
ADC SOLENOID ON (L) 24VDC Switches the ADC Cleaning Solenoid. Low=On. High=Off
ERASE LAMP ON (H) 5VDC Switches the Erase Lamp. Low=Off. High=On
TONER BOX SENSED (L) 5 VDC Monitors presence of Toner Box. Low=In place. High=Not in place
WASTE TONER SENSED (H) 5VDC Monitors the level of toner in the Waste Toner Box. Low=Box not full.
High=Box full
CRUM DATA Xerographic Cartridge CRUM data signal
CRUM CLOCK Xerographic Cartridge CRUM clock signal