magicolor 330 - Base Engine Service Manual 9-103
Removal and Replacement Procedures
RRP 9.49 Waste Toner Box (PL6.1.12)
Removal
1. Open the Front Cover.
2. Lower the IBT Tension Lever.
3. Place your forefinger under the Waste Toner Box lip and push down with your thumb on the Waste
Toner Box latch.
4. Pull the Waste Toner Box straight out and remove it from the print engine.
Keep the Waste Toner Box level. The Box contains toner. Do not turn the Box upside
down.
Replacement
1. Open the Front Cover.
2. Slide the Waste Toner Box into the Toner Box cavity.
3. Push in on the Waste Toner Box until it latches into place.
4. Raise the IBT Tension Lever.
5. Close the Front Cover.