magicolor 330 - Base Engine Service Manual 9-63
Removal and Replacement Procedures
RRP 9.29 MSI Pick Up Roll (PL4.2.11)We recommend that you replace Pick Up Rolls as a set.
Removal
1. Remove the MSI Top Cover Assembly (RRP 9.26).
2. Release the latch holding the Front Core Roll to the Pick Up Shaft and slide the Roll away from the
Front Pickup Roll.
3. Slide the Front Pick Up Roll toward the Front Core Roll, far enough so the Pick Up Roll clears the lock-
ing pin and remove the Front Pick Up Roll.
4. Release the latch holding the Rear Core Roll to the P ick Up Shaft and slide the Roll away from the
Rear Pickup Roll.
5. Slide the Rear Pick Up Roll toward the Rear Core Roll, far enough so the Pick Up Roll clears the lock-
ing pin and remove the Rear Pick Up Roll.
Replacement
1. Remove the MSI Top Cover Assembly (RRP 9.26).
2. Release the latch holding the Front Core Roll to the Pick Up Shaft and slide the Roll away from the
Front Pickup Roll locking pin.
3. Reinstall the Front Pick Up Roll onto the Pick Up Sha ft, making sure the locking pin notch in the Roll
matches the position of the locking pin sticking out of the Shaft.
4. Slide the Front Pick Up Roll so the locking pin fits into the notch on the Roll.
5. Slide the Front Core Roll toward the Front Pick Up Roll until the Front Core Roll latch locks into place
on the Shaft.
6. Release the latch holding the Rear Core Roll to the P ick Up Shaft and slide the Roll away from the
Rear Pickup Roll locking pin.
7. Reinstall the Rear Pick Up Roll onto the Pick Up Shaft, making sure the locki ng pin notch in the Roll
matches the position of the locking pin sticking out of the Shaft.
8. Slide the Rear Pick Up Rol l so the locking pin fits into the notch on the Roll.
9. Slide the Rear Co re Roll toward the Rear Pick Up Roll until the Rear Core Roll latch loc ks into place on
the Shaft.
10. Reinstall the MSI Top Cover Assembly (RRP 9.26).