magicolor 330 - Base Engine Service Manual 9-203
Removal and Replacement Procedures
RRP 9.99 Lower Guide Assembly (PL9.2.26)
Removal
1. Remove the Upper Guide Assembl y (RRP 9.98).
2. Remove the screw securi ng the Lower Guide Assembly to the frame.
3. Slide the Guide to the rear of the Fuser to unhook the latches, and remove the Guide.
Replacement
1. Reinstall the Lower E xit Guide by positioning the Guide slightly to the rear of the installed position and
with the Heat Roll Fingers resting on the Heat Roll.
2. Slide the Guide to the front of the Fuser, making sure you ho ok the three latches that are under the
Guide.
3. Line up the screw hole in the Guide with the screw hole in the Fuse r frame and use one screw to
secure the Guide to the Fuser.
4. Reinstall the Upper Guide Assembly (RRP 9.98).